Precautions For CNC Milling Machine Preparation

1. Before operation, you must be familiar with the general performance, structure, transmission principle and control program of the CNC milling machine, and master the functions and operating procedures of each operation button and indicator light. Do not operate or adjust the machine until you understand the entire operation.

2. Before starting the machine tool, check whether the electrical control system of the machine tool is normal, whether the lubrication system is smooth, whether the oil quality is good, and add enough lubricating oil as required, whether the operating handles are correct, and whether the workpiece, fixture and tool are firmly clamped , check whether the coolant is sufficient, then drive the car at a slow speed for 3 to 5 minutes, check whether the transmission components are normal, and confirm that there is no fault before it can be used normally.

3. After the program debugging is completed, the steps must be approved by the instructor, and skipping steps are not allowed. Without the permission of the instructor, unauthorized operation or illegal operation, the result will be treated as zero points, and those who cause an accident will be punished according to relevant regulations and compensated for the corresponding losses.

4. Before machining parts, it is necessary to strictly check whether the origin of the machine tool and tool data are normal and perform simulation without cutting trajectory.